Reflective flex and flock materials are typically cut using a plotter with a 45° knife, but adjustments to speed and pressure are often needed. For best results, reduce the plotter’s speed and increase the blade pressure slightly from standard vinyl-cutting settings. Hand-cutting with pointed scissors is also possible, especially for smaller designs. Cutting with a Plotter: Additional […]
HOW TO APPLY UV STICKER ON ITEM’S
To apply a UV DTF sticker on other item, ensure clean the surface, then peel off the backing from the sticker, position it carefully, and rub it firmly with a squeegee or similar tool to ensure it adheres well. Finally, gently peel away the clear carrier sheet. Below is the detailed breakdown on how to apply UV sticker […]
ABS PRINT (Acrylonitrile Butadiene Styrene)
First, you are might be wondering what is meant by ABS material? ABS means Acrylonitrile Butadiene Styrene (ABS). ABS (Acrylonitrile Butadiene Styrene) is part of the thermoplastic polymers family, it is actually a common thermoplastic polymer. As its name implies, ABS is created from Acrylonitrile, Butadiene and Styrene polymers. It is a material commonly used in personal […]
How to print -Sublimation Lanyard
2. Printing onto Sublimation Paper: To print a sublimation lanyard from a PDF file, you’ll need a sublimation printer, sublimation paper, a heat press, and the design file. First, prepare your PDF design in a graphic design ensure to put it in size of lanyard polyester material, either 36 by 0.9 or 42 by 0.9, the size […]
